N
The Daily Insight

What does Craft stand for in aviation?

Author

Rachel Ross

Updated on May 02, 2026

What does Craft stand for in aviation?

Clearance limit
Overview. CRAFT stands for: Clearance limit, the end point of the clearance (usually, but not always, the destination airport) Route, the route that the flight is to follow as part of the clearance (often the route originally filed, although ATC may change this)

What are some flying terms?

An A-Z of aviation definitions

TermDefinition
RollMotion on an aircraft along its nose-to-tail axis.
RudderA vertical control surface in the tail of an airplane, which controls the side-to-side movement (YAW) of an aircraft.
RunwayA rectangular area of the ground set aside for aircraft to land and take-off.

What is VFR and IFR?

VFR stands for Visual Flight Rules, and IFR stands for Instrument Flight Rules. VFR and IFR are the two different sets of rules for piloting an aircraft. Pilots use these terms in all sorts of ways, from the type of airplane they’re operating to the weather at the airport.

What is Grabcard IFR?

GRAB CARD NOTE: For IFR flight you need. A TOMATO FLAMES + FLAPS + GRAB CARD. Acronym: GRAB CARD. G – Generator/Alternator. R – Radios for Navigation (VOR)

What does Craft stand for?

CRAFT

AcronymDefinition
CRAFTCan’t Remember A Freakin’ Thing (polite form)
CRAFTClearance, Route, Altitude, Frequency, Transponder (aviation mnemonic, IFR clearnance)
CRAFTCommunication, Resources, Approach, Foundation and Technique (haircutting system)
CRAFTComponent Repository And Framework Technology

Is Special VFR and IFR clearance?

The Special VFR clearance exists to help VFR pilots/aircraft get in and out of controlled airfields when the field is IFR without an IFR clearance/flight plan. It’s not an IFR clearance, so if your aircraft is a VFR-only aircraft, you can use special VFR (but only between sunrise and sunset).

What is exiting a plane called?

Use the verb disembark to describe leaving a ship, airplane or other type of vehicle, like making sure you haven’t left anything in the plane’s overhead compartment before you disembark.

What do Planes say when landing?

To indicate the landing clearance or final approach, the Captain will either make the following announcement and/or blink the No Smoking sign. “Flight attendants, prepare for landing please.” “Cabin crew, please take your seats for landing.” It may be followed by an announcement by a flight attendant.

What is lifr?

Low IFR (LIFR) is a sub-category of IFR. VFR means a ceiling greater than 3,000 feet AGL and visibility greater than five miles. Marginal VFR (MVFR) is a sub- category of VFR. This exercise helps establish your personal “comfort level” for VFR, MVFR, IFR, and LIFR weather conditions.

What is VMC in aviation?

What is V? mc. Familiar to pilots of multi-engine aircraft, Vmc is the speed below which aircraft control cannot be maintained if the critical engine fails under a specific set of circumstances (see 14 CFR part 23). It is marked as a red radial line on most airspeed indicators.

What is a Mel in aviation?

Best Practices. The Minimum Equipment List (MEL) is a document and method aircraft operators use to obtain relief from Federal Aviation Regulations requiring that all equipment installed on the aircraft be operative at the time of flight.

What does the acronym craft stand for?

CRAFT stands for: Transponder , the transponder code that must be set for the aircraft prior to departure and during the flight. T also stands for time, as in void time, if one is issued. A void time is an expiration time, meaning, the IFR clearance is voided if the aircraft is not airborne by the void time.

What is the abbreviation for aviation?

This abbreviation is usually found in customs and border control, in pilot manuals, or on signs at the airport. You might abbreviate the word aviation to aviat or AVN. on a business card, on a nameplate, or on signage.

What is the acronym for aerospace?

aerospace. as abbreviation means “adj. Concerning the earth’s atmosphere and its immediate environs, as in Aerospace Museum.”.